Get ADB and open a command window

Go to your TV and hit the Home menu – Settings – About. Click the build number 7 times to activate the developer tools menu item. Open it and click on “enable ADB debugging.”

Go to your tv’s Home menu – Settings – About – Status and note the ip address of the TV. Use it in the line below.

Type

adb connect xxx.xxx.xxx.xxxA popup will appear on your TV. Use your remote to check the box to always allow connections from your PC

Type

adb shell pm uninstall -k –user 0 tv.samba.ssmType

adb uninstall tv.samba.ssm

# Perfect waffles recipe.

After our visit to the Madison Kitchen in Seattle I was looking for a way to reproduce their waffles. I’m gonna collect here some recipes from around the net that could be a good match.

**1. ****Recipe: Overnight Waffles**

“super-crisp on the outside, light and tender inside, with complex flavor of yeast risen batter, these are the best waffles you can make.”

– 1/2 tsp instant **yeast**

If your yeast packet has been open for more than a week, consider doubling the amount.

– 2 c **flour**

I often use up to 1/2 cup wholewheat flour for a healthier (!) nuttier waffle

– 1 tbspn **sugar**

– 1/2 tspn **salt**

– 2 cups **milk**

– 8 tbspn **butter**, melted & cooled

This is a lot of butter. I’ve made them with 6 tbpsns and they tasted yummy. I might try with even less.

– 1/2 tspn **vanilla** (optional. I don’t bother)

– 2 **eggs**

**2.** http://www.tasteofhome.com/recipes/true-belgian-waffles (Originally published as True Belgian Waffles in Country Woman March/April 1997, p29)

TOTAL TIME: Prep/Total Time: 20 min. MAKES: 5 servings

**Ingredients**

2 cups all-purpose flour | mod1: 1 3/4 cups flour and 1/4 cup packed cornstarch

3/4 cup sugar

mod1: 1/4 tsp. salt

mod1: 2 tsp. vanilla

3-1/2 teaspoons baking powder

2 large eggs, separated

1-1/2 cups milk

1 cup butter, melted | mod1: 1 1/2 sticks butter

1 teaspoon vanilla extract

Sliced fresh strawberries or syrup

Add to Shopping List

Nutritional Facts

1 serving (2 each) equals 696 calories, 41 g fat (25 g saturated fat), 193 mg cholesterol, 712 mg sodium, 72 g carbohydrate, 1 g fiber, 10 g protein.

**Directions**

1. In a bowl, combine flour, sugar and baking powder. In another bowl, lightly beat egg yolks. Add milk, butter and vanilla; mix well. Stir into dry ingredients just until combined. Beat egg whites until stiff peaks form; fold into batter.

2. Bake in a preheated waffle iron according to manufacturer’s directions until golden brown. Serve with strawberries or syrup. Yield: 10 waffles (about 4-1/2 inches).

mod1: 3 1/2 temperature setting in Waring Belgium waffle maker. The 5 minute cook time was perfect – set timer for 5 minutes; 20 seconds then flip; cook 4 minutes and flip back for last minute.

**3. http://orangette.net/2010/05/you-deserve-a-waffle/**

## MARION CUNNINGHAM’S RAISED WAFFLES

### FROM THE BREAKFAST BOOK

This recipe uses dry yeast, which is often sold as “active dry” yeast. It’s different from instant yeast (often sold as “rapid rise”), so be careful not to confuse the two, even though the packaging often looks similar.

Most waffle recipes work in any kind of waffle maker, but I get the sense that this one is intended for use on a standard (not Belgian) waffle maker. Mine is Belgian-style, and the batter was a bit too thin to really fill it properly. It wasn’t a biggie – they still taste great, and they’re pretty on one side, at least – but just, you know, FYI.

Pour the water into a large mixing bowl. (The batter will rise to double its volume, so keep that in mind when you choose the bowl.) Sprinkle the yeast over the water, and let stand to dissolve for 5 minutes.

Add the milk, butter, salt, sugar, and flour, and beat until well blended and smooth. (Electric beaters do a nice job of this.) Cover the bowl with plastic wrap, and let it stand overnight at room temperature.

Before cooking the waffles, preheat a waffle maker. Follow your waffle maker’s instruction manual for this, but my guess is that you’ll want to heat it on whatever setting is approximately medium-high. My waffle maker has a heat dial that runs from 1 to 7, and I turned it to 5. My waffle maker is nonstick, so I didn’t grease it, and Marion Cunningham doesn’t call for greasing it, either.

Just before cooking the waffles, add the eggs and baking soda, and stir to mix well. The batter will be very thin. Pour an appropriate amount of batter into your hot waffle maker: this amount will vary from machine to machine, and you should plan to use your first waffle as a test specimen. Cook until golden and crisp.

Yield: depends on the size and configuration of your waffle iron

**4**. http://orangette.net/2010/05/you-deserve-a-waffle/

## A GREAT MAKE-THE-MORNING-OF WAFFLE

### ADAPTED SLIGHTLY FROM THE “WAFFLE OF INSANE GREATNESS” RECIPE

The original version of this recipe calls for 1 cup milk or buttermilk, but I split the difference and use ½ cup of each. The texture of the batter was lovely, and I liked the slight tangy quality of the waffles, so I’d recommend that you try the same course of action.

Also, this waffle works in any kind of waffle maker.

In a medium bowl, combine the flour, cornstarch, baking powder, baking soda, salt, and sugar. Whisk well. Add the milk, buttermilk, vegetable oil, egg, and vanilla extract. Whisk to blend well, so that few (if any) lumps remain. Set aside to rest for 30 minutes.

Preheat a waffle iron. Follow your waffle maker’s instruction manual for this, but my guess is that you’ll want to heat it on whatever setting is approximately medium-high. My waffle maker has a heat dial that runs from 1 to 7, and I turned it to 5. There’s no need to grease the waffle maker.

Pour an appropriate amount of batter into your hot waffle maker: this amount will vary from machine to machine, and you should plan to use your first waffle as a test specimen. Cook until golden and crisp.

Yield: depends on the size and configuration of your waffle iron

# [Dynamic Programming] Making change using the fewest coins – recursive and iterative solutions.

http://interactivepython.org/runestone/static/pythonds/Recursion/DynamicProgramming.html

class Coins: def __init__(self, coinValueList): self.coinValueList=coinValueList self.minCoins=[] self.coinsUsed=[] def _recMkChange(self,change): minCoins = change+1 if change in self.coinValueList: self.minCoins[change] = 1 self.coinsUsed[change] = change return 1 elif self.minCoins[change] &gt; 0: return self.minCoins[change] else: for i in [ c for c in self.coinValueList if c &lt;= change ]: numCoins = 1 + self._recMkChange(change-i) if numCoins &lt; minCoins: minCoins = numCoins self.minCoins[change] = minCoins self.coinsUsed[change] = i return minCoins def recMkChange(self,change): if change < 1: return (0,[]) self.minCoins=[0]*(change+1) self.coinsUsed=[0]*(change+1) return (self._recMkChange(change), self._showChange(change)) def _dpMakeChange(self,change): for cents in range(change+1): coinCount = cents newCoin = 1 for j in [ c for c in self.coinValueList if c &lt;= cents ]: if self.minCoins[cents-j] + 1 &lt; coinCount: coinCount = self.minCoins[cents-j]+1 newCoin = j self.minCoins[cents] = coinCount self.coinsUsed[cents] = newCoin return self.minCoins[change] def dpMakeChange(self,change): if change < 1: return (0,[]) self.minCoins=[0]*(change+1) self.coinsUsed=[0]*(change+1) return (self._dpMakeChange(change), self._showChange(change)) def _showChange(self,change): coin = change result = [] while coin &gt; 0: thisCoin = self.coinsUsed[coin] if thisCoin == 0: break # infinite loop safeguard result.append(thisCoin) coin = coin - thisCoin return result c = Coins([1,5,10,25]) print c.recMkChange(63) print c.dpMakeChange(63)

# Finding the Longest Palindromic Substring in Linear Time

https://www.akalin.com/longest-palindrome-linear-time

© Fred Akalin 2005–2015.

Finding the Longest Palindromic Substring in Linear Time

Fred Akalin

November 28, 2007

Another interesting problem I stumbled across on reddit is finding the longest substring of a given string that is a palindrome. I found the explanation on Johan Jeuring’s blog somewhat confusing and I had to spend some time poring over the Haskell code (eventually rewriting it in Python) and walking through examples before it “clicked.” I haven’t found any other explanations of the same approach so hopefully my explanation below will help the next person who is curious about this problem.

Of course, the most naive solution would be to exhaustively examine all (n2) substrings of the given n-length string, test each one if it’s a palindrome, and keep track of the longest one seen so far. This has complexity O(n3), but we can easily do better by realizing that a palindrome is centered on either a letter (for odd-length palindromes) or a space between letters (for even-length palindromes). Therefore we can examine all 2n+1 possible centers and find the longest palindrome for that center, keeping track of the overall longest palindrome. This has complexity O(n2).

It is not immediately clear that we can do better but if we’re told that an Θ(n) algorithm exists we can infer that the algorithm is most likely structured as an iteration through all possible centers. As an off-the-cuff first attempt, we can adapt the above algorithm by keeping track of the current center and expanding until we find the longest palindrome around that center, in which case we then consider the last letter (or space) of that palindrome as the new center. The algorithm (which isn’t correct) looks like this informally:

Set the current center to the first letter.

Loop while the current center is valid:

Expand to the left and right simultaneously until we find the largest palindrome around this center.

If the current palindrome is bigger than the stored maximum one, store the current one as the maximum one.

Set the space following the current palindrome as the current center unless the two letters immediately surrounding it are different, in which case set the last letter of the current palindrome as the current center.

Return the stored maximum palindrome.

This seems to work but it doesn’t handle all cases: consider the string “abababa”. The first non-trivial palindrome we see is “a|bababa”, followed by “aba|baba”. Considering the current space as the center doesn’t get us anywhere but considering the preceding letter (the second ‘a’) as the center, we can expand to get “ababa|ba”. From this state, considering the current space again doesn’t get us anywhere but considering the preceding letter as the center, we can expand to get “abababa|”. However, this is incorrect as the longest palindrome is actually the entire string! We can remedy this case by changing the algorithm to try and set the new center to be one before the end of the last palindrome, but it is clear that having a fixed “lookbehind” doesn’t solve the general case and anything more than that will probably bump us back up to quadratic time.

The key question is this: given the state from the example above, “ababa|ba”, what makes the second ‘b’ so special that it should be the new center? To use another example, in “abcbabcba|bcba”, what makes the second ‘c’ so special that it should be the new center? Hopefully, the answer to this question will lead to the answer to the more important question: once we stop expanding the palindrome around the current center, how do we pick the next center? To answer the first question, first notice that the current palindromes in the above examples themselves contain smaller non-trivial palindromes: “ababa” contains “aba” and “abcbabcba” contains “abcba” which also contains “bcb”. Then, notice that if we expand around the “special” letters, we get a palindrome which shares a right edge with the current palindrome; that is, the longest palindrome around the special letters are proper suffixes of the current palindrome. With a little thought, we can then answer the second question: to pick the next center, take the center of the longest palindromic proper suffix of the current palindrome. Our algorithm then looks like this:

Set the current center to the first letter.

Loop while the current center is valid:

Expand to the left and right simultaneously until we find the largest palindrome around this center.

If the current palindrome is bigger than the stored maximum one, store the current one as the maximum one.

Find the maximal palindromic proper suffix of the current palindrome.

Set the center of the suffix from c as the current center and start expanding from the suffix as it is palindromic.

Return the stored maximum palindrome.

However, unless step 2c can be done efficiently, it will cause the algorithm to be superlinear. Doing step 2c efficiently seems impossible since we have to examine the entire current palindrome to find the longest palindromic suffix unless we somehow keep track of extra state as we progress through the input string. Notice that the longest palindromic suffix would by definition also be a palindrome of the input string so it might suffice to keep track of every palindrome that we see as we move through the string and hopefully, by the time we finish expanding around a given center, we would know where all the palindromes with centers lying to the left of the current one are. However, if the longest palindromic suffix has a center to the right of the current center, we would not know about it. But we also have at our disposal the very useful fact that a palindromic proper suffix of a palindrome has a corresponding dual palindromic proper prefix. For example, in one of our examples above, “abcbabcba”, notice that “abcba” appears twice: once as a prefix and once as a suffix. Therefore, while we wouldn’t know about all the palindromic suffixes of our current palindrome, we would know about either it or its dual.

Another crucial realization is the fact that we don’t have to keep track of all the palindromes we’ve seen. To use the example “abcbabcba” again, we don’t really care about “bcb” that much, since it’s already contained in the palindrome “abcba”. In fact, we only really care about keeping track of the longest palindromes for a given center or equivalently, the length of the longest palindrome for a given center. But this is simply a more general version of our original problem, which is to find the longest palindrome around any center! Thus, if we can keep track of this state efficiently, maybe by taking advantage of the properties of palindromes, we don’t have to keep track of the maximal palindrome and can instead figure it out at the very end.

Unfortunately, we seem to be back where we started; the second naive algorithm that we have is simply to loop through all possible centers and for each one find the longest palindrome around that center. But our discussion has led us to a different incremental formulation: given a current center, the longest palindrome around that center, and a list of the lengths of the longest palindromes around the centers to the left of the current center, can we figure out the new center to consider and extend the list of longest palindrome lengths up to that center efficiently? For example, if we have the state:

<"ababa|??", [0, 1, 0, 3, 0, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?]>

where the highlighted letter is the current center, the vertical line is our current position, the question marks represent unread characters or unknown quantities, and the array represents the list of longest palindrome lengths by center, can we get to the state:

<"ababa|??", [0, 1, 0, 3, 0, 5, 0, ?, ?, ?, ?, ?, ?, ?, ?]>

and then to:

<"abababa|", [0, 1, 0, 3, 0, 5, 0, 7, 0, 5, 0, 3, 0, 1, 0]>

efficiently? The crucial thing to notice is that the longest palindrome lengths array (we’ll call it simply the lengths array) in the final state is palindromic since the original string is palindromic. In fact, the lengths array obeys a more general property: the longest palindrome d places to the right of the current center (the d-right palindrome) is at least as long as the longest palindrome d places to the left of the current center (the d-left palindrome) if the d-left palindrome is completely contained in the longest palindrome around the current center (the center palindrome), and it is of equal length if the d-left palindrome is not a prefix of the center palindrome or if the center palindrome is a suffix of the entire string. This then implies that we can more or less fill in the values to the right of the current center from the values to the left of the current center. For example, from [0, 1, 0, 3, 0, 5, ?, ?, ?, ?, ?, ?, ?, ?, ?] we can get to [0, 1, 0, 3, 0, 5, 0, ≥3?, 0, ≥1?, 0, ?, ?, ?, ?]. This also implies that the first unknown entry (in this case, ≥3?) should be the new center because it means that the center palindrome is not a suffix of the input string (i.e., we’re not done) and that the d-left palindrome is a prefix of the center palindrome.

From these observations we can construct our final algorithm which returns the lengths array, and from which it is easy to find the longest palindromic substring:

Initialize the lengths array to the number of possible centers.

Set the current center to the first center.

Loop while the current center is valid:

Expand to the left and right simultaneously until we find the largest palindrome around this center.

Fill in the appropriate entry in the longest palindrome lengths array.

Iterate through the longest palindrome lengths array backwards and fill in the corresponding values to the right of the entry for the current center until an unknown value (as described above) is encountered.

set the new center to the index of this unknown value.

Return the lengths array.

Note that at each step of the algorithm we’re either incrementing our current position in the input string or filling in an entry in the lengths array. Since the lengths array has size linear in the size of the input array, the algorithm has worst-case linear running time. Since given the lengths array we can find and return the longest palindromic substring in linear time, a linear-time algorithm to find the longest palindromic substring is the composition of these two operations.

Here is Python code that implements the above algorithm (although it is closer to Johan Jeuring’s Haskell implementation than to the above description):

```
```def fastLongestPalindromes(seq):
"""
Behaves identically to naiveLongestPalindrome (see below), but
runs in linear time.
"""
seqLen = len(seq)
l = []
i = 0
palLen = 0
# Loop invariant: seq[(i - palLen):i] is a palindrome.
# Loop invariant: len(l) >= 2 * i - palLen. The code path that
# increments palLen skips the l-filling inner-loop.
# Loop invariant: len(l) < 2 * i + 1. Any code path that
# increments i past seqLen - 1 exits the loop early and so skips
# the l-filling inner loop.
while i < seqLen:
# First, see if we can extend the current palindrome. Note
# that the center of the palindrome remains fixed.
if i > palLen and seq[i - palLen - 1] == seq[i]:
palLen += 2
i += 1
continue
# The current palindrome is as large as it gets, so we append
# it.
l.append(palLen)
# Now to make further progress, we look for a smaller
# palindrome sharing the right edge with the current
# palindrome. If we find one, we can try to expand it and see
# where that takes us. At the same time, we can fill the
# values for l that we neglected during the loop above. We
# make use of our knowledge of the length of the previous
# palindrome (palLen) and the fact that the values of l for
# positions on the right half of the palindrome are closely
# related to the values of the corresponding positions on the
# left half of the palindrome.
# Traverse backwards starting from the second-to-last index up
# to the edge of the last palindrome.
s = len(l) - 2
e = s - palLen
for j in xrange(s, e, -1):
# d is the value l[j] must have in order for the
# palindrome centered there to share the left edge with
# the last palindrome. (Drawing it out is helpful to
# understanding why the - 1 is there.)
d = j - e - 1
# We check to see if the palindrome at l[j] shares a left
# edge with the last palindrome. If so, the corresponding
# palindrome on the right half must share the right edge
# with the last palindrome, and so we have a new value for
# palLen.
if l[j] == d: # *
palLen = d
# We actually want to go to the beginning of the outer
# loop, but Python doesn't have loop labels. Instead,
# we use an else block corresponding to the inner
# loop, which gets executed only when the for loop
# exits normally (i.e., not via break).
break
# Otherwise, we just copy the value over to the right
# side. We have to bound l[i] because palindromes on the
# left side could extend past the left edge of the last
# palindrome, whereas their counterparts won't extend past
# the right edge.
l.append(min(d, l[j]))
else:
# This code is executed in two cases: when the for loop
# isn't taken at all (palLen == 0) or the inner loop was
# unable to find a palindrome sharing the left edge with
# the last palindrome. In either case, we're free to
# consider the palindrome centered at seq[i].
palLen = 1
i += 1
# We know from the loop invariant that len(l) < 2 * seqLen + 1, so
# we must fill in the remaining values of l.
# Obviously, the last palindrome we're looking at can't grow any
# more.
l.append(palLen)
# Traverse backwards starting from the second-to-last index up
# until we get l to size 2 * seqLen + 1. We can deduce from the
# loop invariants we have enough elements.
lLen = len(l)
s = lLen - 2
e = s - (2 * seqLen + 1 - lLen)
for i in xrange(s, e, -1):
# The d here uses the same formula as the d in the inner loop
# above. (Computes distance to left edge of the last
# palindrome.)
d = i - e - 1
# We bound l[i] with min for the same reason as in the inner
# loop above.
l.append(min(d, l[i]))
return l

And here is a naive quadratic version for comparison:

```
```def naiveLongestPalindromes(seq):
seq = seq.replace(' ', '')
seq = seq.lower()
seqLen = len(seq)
lLen = 2 * seqLen + 1
l = []
maxLen=0
maxPos=0
for i in xrange(lLen):
# If i is even (i.e., we're on a space), this will produce e
# == s. Otherwise, we're on an element and e == s + 1, as a
# single letter is trivially a palindrome.
s = i / 2
e = s + i % 2
# Loop invariant: seq[s:e] is a palindrome.
while s > 0 and e < seqLen and seq[s - 1] == seq[e]:
s -= 1
e += 1
l.append(e - s)
if e - s > maxLen:
maxLen = e-s
maxPos = len(l) / 2 + len(l) % 2;
print maxPos, maxLen, seq[maxPos-maxLen/2-1:maxPos+maxLen/2]
return l
print fastLongestPalindromes("Are we not drawn onward to new era?")
print naiveLongestPalindromes("Are we not drawn onward to new era?")

# fast SELinux related problem fix example

sudo cat /var/log/audit/audit.log | grep nginx | grep denied | audit2allow -M mynginx

sudo semodule -i mynginx.pp

# How to create a self-signed wildcard certificate. [cheatsheet]

openssl genrsa -out rootCA.key 2048

openssl req -x509 -new -nodes -sha1 -key rootCA.key -days 3650 -out rootCA.pem

```
```

`openssl genrsa -out SITE.key 2048`

openssl req -new -key SITE.key -out SITE.csr

Create a file named SITE.cnf, and put the following inside:

[req]

req_extensions = v3_req

```
```[v3_req]

keyUsage = keyEncipherment, dataEncipherment

extendedKeyUsage = serverAuth

subjectAltName = @alt_names

`[alt_names]`

DNS.1 = domain.com

DNS.2 = *.domain.com

Finally:

openssl x509 -req -days 9999 -in SITE.csr -CA rootCA.pem -CAkey rootCA.key -CAcreateserial -out SITE.crt -extfile SITE.cnf

```
```

**Great tool to test the installed certificate:**

`gnutls-cli --x509cafile rootCA.pem -p [ssl_sevice_port] domain.com`

# ccna preparation best resources

http://www.networkworld.com/community/odom

# approx: Package caching

approx is the great way to share and speed up package downloads or reduce your bandwidth consumption.

Configuration is pretty obvious, so there’s no need to post any examples anywhere.

# way to find directories with large amount of files

`find . -type d -name "*name1*" -o -name "*name2*" | while read DIR; do ls -A $DIR | echo $(wc -w) $DIR; done | egrep [1-9][0-9][0-9][0-9]+\ | sort -nrk1 | head`

# force english language for nvidia contol panel

To force english language for nvidia contol panel we should rm nv*r.dll from C:\Program Files\NVIDIA Corporation\Display\.